Headlight, position lamp, turn signal lamp, Daytime Running Light (DRL) replacement
(1) Headlight (High) (LED)
(2) Headlight (Low) (LED)
(3) Daytime running light / Position lamp/ Turn signal lamp (LED) (if equipped)
(4) Side marker
If the LED lamp does not operate, have the vehicle checked by an authorized HYUNDAI dealer.
The LED lamps cannot be replaced as a single unit because it is an integrated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the LED lamp, for it may damage related parts of the vehicle.
Side repeater lamp replacement
If the light bulb does not operate, have the vehicle checked by an authorized HYUNDAI dealer.
Rear combination lamp bulb replacement
(1) Stop/Tail lamp
(2) Stop/Tail lamp
(3) Turn signal lamp
(4) Backup lamp
(5) Side marker
High mounted stop lamp replacement
If the high mounted stop does not operate, contact an authorized HYUNDAI dealer.
The LED lamps cannot be replaced as a single unit because it is an integrated unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or repair the LED lamp, for it may damage related parts of the vehicle.
License Plate Light Bulb Replacement
1. Using a flat-blade screwdriver, gently pry the lens cover from the lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb.
4. Reinstall in the reverse order.
Interior Light Bulb Replacement
Map lamp, Room lamp, Vanity mirror lamp, Luggage compartment lamp and Glove box lamp
1. Using a flat-blade screwdriver, gently pry the lens from the interior lamp housing.
2. Remove the bulb by pulling it straight out.
WARNING
Prior to working on the Interior Lights, ensure that the “OFF” button is depressed to avoid burning your fingers or receiving an electric shock.
3. Install a new bulb in the socket.
4. Align the lens tabs with the interior lamp housing notches and snap the lens into place.
NOTICE
Use care not to dirty or damage lens, lens tab, and plastic housings.
Download Manual